• +91-9915106077, 9815507846
  • info@lalsoncuttingtools.com
  • Office Hour: 10:pm - 7:00pm
GET A QUOTE
  • Home
  • HSS Cutting Tools
  • Counter Bore Taper Shank

A cutter with teeth on the periphery and the end, integral with Morse Taper Shank, and having a detachable pilot. The Cutter is intended for producing a flat seating for the accommodation of the head of a bolt set screw etc. and is located by means of the pilot with relation to a center hole. Counter bores of size upto and including 1/2" dia. are supplied with solid pilot.
Specifications Confirm to : IS 5710 1988, ISO 4207 - 1977.

Product Specification

Diameter (in mm) Cutting Edge Length Overall Length Morse Taper No. Pilot Diameter
13.5 22 132 2 5.0 to 11.2
14.5 22 132 2 5.0 to 12.5
16.5 25 140 2 6.3 to 14.0
17.5 25 140 2 6.3 to 14.0
19.5 25 140 2 6.3 to 16.0
20 25 140 2 6.3 to 18.0
22 30 150 2 8.0 to 18.0
23 30 150 2 8.0 to 20.0
25 30 150 2 8.0 to 22.4
26 35 180 3 10.0 to 22.4
28 35 180 3 10.0 to 22.4
29 35 180 3 10.0 to 25.0
30 35 180 3 10.0 to 25.0
31 35 180 3 10.0 to 25.0
33 40 190 3 12.5 to 28.0
34 40 190 3 12.5 to 28.0
35 40 190 3 12.5 to 31.5
36 40 190 3 12.5 to 31.5
37 40 190 3 12.5 to 31.5
39 40 190 3 12.5 to 31.5
40 50 236 4 16.0 to 35.5
41 50 236 4 16.0 to 35.5
43 50 236 4 16.0 to 35.5
46 50 236 4 16.0 to 40.0
48 50 236 4 16.0 to 40.0
51 63 250 4 20.0 to 40.0
53 63 250 4 20.0 to 45.0
55 63 250 4 20.0 to 45.0
57 63 250 4 20.0 to 50.0
59 63 250 4 20.0 to 50.0
61 63 250 4 20.0 to 50.0
63 63 250 4 20.0 to 56.0

We also manufacture as per customer specification.

Enquiry Now